BTCCM - 47108 C20,C22,C24, HYDROCARBONS MIX 250MG/5ML

  • MSDS: BTCCM
  • Manufacturer: SUPELCO INC
  • Product Name: 47108 C20,C22,C24, HYDROCARBONS MIX 250MG/5ML
  • National Stock Number: 6810-00F033305
Product Identification

Product ID:47108 C20,C22,C24, HYDROCARBONS MIX 250MG/5ML
MSDS Date:07/16/1993
FSC:6810
NIIN:00F033305
MSDS Number: BTCCM

Responsible Party
SUPELCO INC
SUPELCO PARK
BELLEFONTE, PA 16823-0048
US

Emergency Phone: 814-359-3441

Info Phone: 814-359-3441

Cage: 54968

Contractor
SIGMA-ALDRICH INC.
14508 ST. LOUIS, MO 63103 US

Telephone: 314-771-5765/414-273-3850X5996

Cage: 54968

Ingredients

OCTANE

CAS: 111-65-9

RTECS: RG8400000

Fraction By Weight: 80%

OSHA PEL 2350 MG/CUM

ACGIH TLV: 1400 MG/CUM


N-OCTADECANE

CAS: 593-45-3

Fraction By Weight: 5%


N-EICOSANE

CAS: 112-95-8

Fraction By Weight: 5%


N-DOCOSANE

CAS: 629-97-0

Fraction By Weight: 5%


N-TETRACOSANE

CAS: 646-31-1

Fraction By Weight: 5%

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY BE FATAL IF INHALED, IRRITATES
EYES, DEPRESSES CENTRAL NERVOUS SYSTEM, NARCOSIS
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION

First Aid

First Aid:EYES: FLUSH W/WATER FOR 15 MIN. SKIN: FLUSH W/LARGE VOLUMES
OF WATER & REMOVE CONTAMINATED CLOTHING. INHALATION: IMMEDIATELY
MOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:60F
Lower Limits:1
Upper Limits:6.5
Extinguishing Media:C02, FOAM, DRY CHEMICAL, DRY SAND OR POWDER TYPE
AGENTS
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS

Accidental Release

Spill Release Procedures:TAKE UP W/ABSORBENT MATERIAL, VENTILATE AREA &
ELIMINATE ALLIGNITION SOURCES.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT & IGNITION
SOURCES. STOREIN DRY, WELL VENTILATED AREA.
Other Precautions:AVOID EYE OR SKIN CONTACT. AVOID BREATHING VAPORS.

Exposure Controls

Respiratory Protection:WEAR FACE MASK W/ORGANIC VAPOR CANISTER
Ventilation:USE ONLY IN EXHAUST HOOD
Protective Gloves:RUBBER
Eye Protection:GLASSES & FACE SHIELD
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:259F
Melt/Freeze Pt:M.P/F.P Text:-70.6F/-57C
Vapor Pres:10
Vapor Density:3.90
Spec Gravity:0.703
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, COLORLESS LIQUID
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, IGNITION SOURCES

Disposal

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE, & LOCAL
REGULATIONS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.